Piedra Paloma
Bright. Light. Contemporary.
A white to light beige natural stone for sophisticated, contemporary architecture.
Discover Piedra Paloma →Natural Stone Siding
Natural stone that adds character to architecture.
From light Piedra Paloma to warm Vinalmont and robust Belgian Blue Stone.
Three types of natural stone •
Countless possibilities •
One specialist
Discover our natural stones
Discuss your facade project
Why natural stone?
A facade that makes a strong impression today and will remain beautiful for years to come
The facade largely determines the character of a building. Natural stone combines an authentic look with durability, architectural freedom, and a tactile quality that is hard to match. Every stone has its own nuances, texture, and character.
01
Natural and unique
No two pieces of natural stone are completely identical. Slight variations in color and texture make every facade unique.
02
Sustainable
Natural stone is built to last for generations and does not require an artificial decorative top layer.
03
Low-maintenance
A properly designed natural stone facade requires little maintenance and ages naturally.
04
Timeless
Natural stone is not a fleeting trend. The material retains its architectural value and gains more character over the years.
05
Architectural Freedom
Large facade panels, strips, baseboards, moldings, and custom-made elements can be combined within a single overall design.
Three pieces of natural stone
Three materials. Three characters.
Choosing the right natural stone starts with the look you have in mind: bright and contemporary, warm Belgian, or a distinct blue-gray.
Vinalmont
Warm. Authentic. Belgian.
Belgian Meuse limestone from our own quarry, with soft shades of gray and a natural look.
Discover Vinalmont →Belgian Blue Stone
Powerful. Timeless. Full of character.
Belgian natural stone with a distinct blue-gray appearance, ideal for facades and architectural accents.
Discover Belgian Blue Stone →
Piedra Paloma
If it really has to be white and natural stone
The elegance of white architecture. The authenticity of natural stone.
Piedra Paloma is a white to soft light beige natural stone for architectural applications where light, tranquility, and sophistication take center stage. The stone combines a bright appearance with the natural nuances and texture that only genuine natural stone can offer.
As a result, the facade is not completely uniform or artificially white, but rather a vibrant facade with subtle color nuances that change with the daylight.
Piedra Paloma looks particularly striking when combined with large windows, dark aluminum trim, wood, and other understated architectural materials.
White to light beige
Genuine natural stone
Large facade panels
Fully Customized
Modern Architecture
Villas & Residential Projects
Coastal Architecture
Light-colored natural stone for light-colored architecture
On the Belgian coast, white and soft natural tones play an important role in contemporary architecture. They enhance the light, keep facades visually uncluttered, and combine particularly well with large windows, terraces, and dark window frames.
Piedra Paloma blends perfectly with that architecture. The stone gives a facade the brightness people look for in white buildings, while retaining the natural nuances and texture of genuine natural stone.
As a result, Paloma is suitable for both modern villas and residential apartment projects where aesthetics, refinement, and the feel of the materials take center stage.
Piedra Paloma gives a facade the brightness of white architecture,
combined with the depth and natural variation of genuine natural stone.
White and light-colored facades
For a calm, clean architectural style.
Coastal Villas
Combined with glass, wood, and dark aluminum.
Residential Projects
Suitable for larger facade surfaces and apartment buildings.
Natural look
Not a flat, uniform white, but subtle variations in shade and texture.
Vinalmont
Belgian natural stone from our own quarry
Warm gray. Natural. Timeless.
Vinalmont is a Belgian Meuse limestone that Renier quarries at its own quarry in Vinalmont. From block to finished facade piece, the material remains under our own control.
The stone has a warm gray color and a soft, natural pattern. Over the years, Vinalmont retains its characteristic appearance, and the color may even become slightly lighter.
As a result, Vinalmont is well-suited to both contemporary architecture and more timeless homes and residential projects.
Our own Belgian quarry
Warm shades of gray
It gets noticeably lighter over time
Custom-Made Products from Our Own Production Facilities
Belgian Blue Stone
A character that lasts for generations
Powerful. Authentic. Unmistakably Belgian.
Belgian Blue Stone gives a facade a distinctive architectural character. Its natural blue-gray color, fossils, and subtle nuances make every facade unique.
Renier quarries Belgian Blue Stone from its own quarry, La Préalle in Sprimont. The stone is then processed in our workshops into exterior cladding and custom architectural elements.
By experimenting with size, texture, and surface finish, the same natural stone can be used in ways that are both bold and contemporary as well as understated and timeless.
La Préalle Quarry
Natural blue-gray shades
A wide variety of finishes and sizes
Sustainable for Generations
One material. One whole.
From exterior cladding to a complete architectural design concept
Natural stone doesn't have to stop at the facade. Renier can use the same stone throughout the entire building, so that the facade, sills, trim, stairs, and outdoor landscaping form a single, cohesive whole.
01
Exterior Siding
From large facade panels to strips and custom-made pieces in various sizes and patterns.
02
Facade base plates
For a durable and architecturally striking transition between the facade and ground level.
03
Window sills
Fully customized and tailored to the facing brick, detailing, and woodwork.
04
Door thresholds
Functional, custom-designed solutions that blend visually with the rest of the building.
05
Door and Window Trim
For architectural accents, classic detailing, or a sleek, contemporary design.
06
Capping stones
Custom-made garden walls, parapets, and other architectural elements.
07
Stairs and steps
Inside and outside, designed to match the same natural stone and finish as the facade.
08
Patios
The same material palette can extend from the facade to the patio and outdoor space.
09
Pool Edges
For a fully integrated design in which the home and its outdoor surroundings form a single whole.
Technology & Installation
A natural stone facade starts with proper installation
The appropriate installation method depends on the type of natural stone, its size, weight, the height of the facade, the substrate, and the architectural detailing. For this reason, each facade is evaluated technically based on the specific project.
01
Installation with a support profile
Sliding system for ventilated facadesIn this technique, a horizontal support profile— usually made of aluminum or stainless steel—is first mechanically fastened to the underlying structure.
The natural stone facade elements are then slid one by one into the profile and positioned. The system can be installed using custom profiles, clips, or a tongue-and-groove joint.
Benefits
- Fast and efficient installation
- Dry system without mortar
- Ability to disassemble and replace
- Suitable for ventilated facades
Points to Consider
- Precise measurements are essential
- Profiles and tolerances must be perfectly matched
- The rear structure is determined on a project-by-project basis
02
Mechanical Anchoring
Individual Fastening of Natural Stone Facade PanelsFor larger natural stone facade panels, each panel can be mechanically anchored individually to the underlying structure.
The type of anchoring is selected based on the natural stone, slab thickness, dimensions, the wall behind it, and the technical load requirements of the project.
This results in a robust fastening system that offers great flexibility in terms of size, rhythm, and architectural detailing.
Benefits
- Suitable for large custom panels
- Each panel is secured individually
- A great deal of freedom in terms of format and facade rhythm
- Proven Technology for Natural Stone Facades
Points to Consider
- Anchors must be properly sized
- The substrate and mounting point are project-specific
- Engineering and dimensions must be coordinated in advance
Projects
Natural Stone in Architecture
From light-colored residential facades to striking Belgian natural stone: each stone takes on a different look depending on the architecture, size, finish, and detailing.
Piedra Paloma
Residential Siding
Light-colored natural stone used in a large-scale residential project in Seoul.
View projects in Piedra Paloma →
Vinalmont
Contemporary home
Warm Belgian Meuse limestone combined with large glass surfaces and sleek architecture.
View projects in Vinalmont →
Belgian Blue Stone
Namur Courthouse
Belgian Blue Stone used as striking facade cladding in a contemporary architectural project.
View projects featuring Belgian Blue Bluestone →
Frequently Asked Questions
Natural Stone Siding
From material selection and finish to installation and maintenance: here are some frequently asked questions about natural stone as a facade cladding material.
Which type of natural stone is suitable for exterior wall cladding? +
Not every type of natural stone is automatically suitable for every facade application. At Renier, we use materials such as Piedra Paloma, Vinalmont, and Belgian Blue Stone for facade cladding. The right choice depends on the desired look, the size, the finish, the installation method, and the technical requirements of the project.
Is Piedra Paloma suitable for exterior cladding on the Belgian coast? +
Yes. Piedra Paloma is particularly well-suited for exterior cladding on the Belgian coast. This natural stone combines a light, refined appearance with properties that make it ideally suited for the coastal climate, where facades are heavily exposed to wind, rain, moisture, and salty sea air.
Furthermore, the white to soft light beige color complements the light-colored architecture characteristic of many homes, apartments, and residential projects along the Belgian coast. The stone’s natural nuances also create a more vibrant and authentic facade appearance than a completely uniform white material.
What is the difference between Piedra Paloma, Vinalmont, and Belgian Blue Stone? +
Piedra Paloma is a white to soft light beige natural stone and complements light, contemporary architecture particularly well. Vinalmont is a Belgian Meuse limestone from our own quarry with warm gray tones and a natural look. Belgian Blue Limestone has a distinct blue-gray character and gives a facade a powerful, timeless look.
How is natural stone installed as siding? +
Natural stone siding can be mechanically fastened in various ways. Depending on the project, one can, for example, use a support profile, a slide-in system, or individual mechanical anchoring. The appropriate method is determined based on factors such as size, weight, substrate, facade height, and architectural detailing.
Is a natural stone facade easy to maintain? +
Natural stone is exceptionally durable and generally requires little maintenance. Like any natural material, its surface changes over time due to weather, the environment, and the passage of time. Choosing the right material and finish is therefore important and is tailored to the application and the desired look.
Can natural stone siding be custom-made? +
Yes. Renier custom-cuts natural stone to suit the specific facade design. Sizes, thicknesses, finishes, corner elements, and other details can be tailored to the architecture and the technical requirements of the project.
Can Renier provide technical guidance to architects and contractors? +
Yes. We assist architects, contractors, and construction professionals with material selection, finishes, dimensions, and detailing. This allows aesthetic choices and technical execution to be aligned with one another right from the design phase.
Your Project
A natural stone facade project?
From material selection and finishing to custom work: our specialists are happy to collaborate with you on your project.
Discuss your facade project