Levelit XL is a installation system that lays large natural stone tiles significantly faster than the traditional method using a bedding layer, resulting in a flatter finish because the tiles are held level by their own weight. The system was developed by Renier for contractors who install large surfaces (patios, driveways, public spaces). In this article, you’ll learn how Levelit XL works, what types of projects it’s suitable for, and how to include it in your order.
Levelit XL is a leveling system consisting of three components: a base plate that goes under the tile, a connecting clip that keeps the adjacent tiles at the same height, and a wedge which the installer tightens until the system is secure. Once the adhesive has cured, the wedge is broken off, leaving only the base plate in the joint.
The difference from traditional installation using a laying bed and manual leveling: with Levelit XL, adjacent tiles automatically level themselves. No tapping on rubber pads, no spirit level between each tile.
Levelit XL is designed for large areas with large-format tiles, typically 60×60 cm or larger. Three typical use cases:
Patio Projects for large areas. Fewer manual level checks per tile mean real time savings on every job site.
Driveways where large tiles are both visually appealing and functional. Levelit XL keeps the tiles level despite the weight of a car, preventing unevenness over the years.
Public Space such as shopping center areas, large patios, or building facades. Here, a level surface is important for safety (no tripping hazards) and maintenance.
For small projects or tiles that are not made of natural stone, traditional installation is usually sufficient.
| Step | What do you do? | Time |
|---|---|---|
| 1 | Apply adhesive to the surface as usual | N/A. |
| 2 | Place the base plate under the tile corners | 30 seconds per corner |
| 3 | Place the natural stone tile in the adhesive | normal |
| 4 | Slide the connecting clip between adjacent tiles | 15 seconds per joint |
| 5 | Press the wedge into the clip until the system locks into place | 5 sec |
| 6 | Allow the adhesive to cure according to the manufacturer's instructions | 24–48 hours |
| 7 | Break off the wedge (quickly with a hammer or your foot) | 5 seconds per wedge |
| 8 | Fill joints according to specifications | normal |
Time savings are achieved in steps 4–5 and 7. With large tile sizes, where the installer would normally have to work tile by tile using a rubber mallet and a level, the system replaces that entire process.
Speed: significantly faster than traditional installation. Specific examples from completed projects are available upon request from our technical department.
Flatness: Levelit XL keeps adjacent tiles perfectly level. Traditional installation depends on the installer's experience.
Final Image: No visible gaps between tiles due to differences in thickness or installation inaccuracies. A visually more harmonious final result.
Maintenance: A flatter surface means better drainage and less dirt buildup in uneven areas.
| Tile Size | Levelit XL Recommended | Reason |
|---|---|---|
| 30×30 cm | Optional | Small size—the traditional one is usually enough |
| 60×60 cm | Default | Classic patio tile |
| 90×90 cm | Highly recommended | High weight, traditionally below cost |
| 100×100 cm and larger | Required | The installer can't get the tiles level |
| 60×120 cm rectangular | Highly recommended | Asymmetry traditionally makes things more difficult |
Levelit XL works on all types of natural stone that we supply, provided the tiles are of a standard thickness. Our patio tiles made of Belgian blue stone, granite tiles and Piedra Paloma white natural stone are all compatible.
For very thin tiles (less than 2 cm) or very thick natural stone slabs (more than 5 cm), please consult our technical department regarding suitability.
You can add Levelit XL to any natural stone order as an option. There are two ways to do this:
Upon request: include in your Request for a Quote that you want Levelit XL. We include the system in our calculation per square meter.
For B2B accounts: Contractors with a B2B login can order Levelit XL as a standalone module.
Price per square meter upon request. We offer a volume discount for large orders.
What exactly is Levelit XL? An installation system for large natural stone tiles that uses a base plate, clip, and wedge to keep adjacent tiles at the same height while the adhesive cures.
What is the minimum tile size for which Levelit XL is useful? Highly recommended for sizes 90×90 cm and larger. Standard for 60×60 cm; optional for smaller sizes.
How much time will I save? The benefit lies in eliminating the need for manual level checks on each tile and in the quick removal of the wedges. Ask our technical department for reference projects.
Is the system reusable? The wedge breaks off after curing and is considered used up. The base plate remains in the joint and cannot be reused. Levelit XL is a consumable product for each project and can be ordered by square meter.
Does it work on all surfaces? Yes, provided the subfloor is suitable for the type of natural stone. Standard concrete subfloor, concrete tiles, or screed.
Can you train my team to use Levelit XL? Our technical department can provide a brief introduction upon initial delivery. For comprehensive training, please contact our sales department.
How much does Levelit XL cost per square meter? Upon request. For the exact price for your project: request a quote.
Is Levelit XL the same as other installation systems on the market? At Renier, Levelit XL has been optimized for large natural stone tiles. Other systems operate on a similar principle but are often designed for ceramic tiles, which have a different weight distribution.